Table of Contents

Boot PCs from iSCSI

With iSCSI, a PC uses a disk that sits on a server instead of a disk inside the PC. The PC reaches the disk over the network. This lets you keep and manage all the disks in one place.

There are two sides:

  • The target is the server that holds the disk files.
  • The initiator is the PC that uses them.

iSCSI boot is easy to get wrong, so take each step slowly.

Note

SharpDay Deploy has no iSCSI settings of its own yet. These guides cover the iSCSI side.

The steps

  1. Set up a server to hold the disks: Set up a Windows Server iSCSI target.
  2. Make the Windows disk the PCs will use: Prepare a Windows 11 disk. You can build it in a virtual machine, or copy a real PC. Copying a real PC takes more work, but is more likely to just work.
  3. Check the PCs' network cards can boot from iSCSI: Network cards for iSCSI boot.

If something goes wrong, see Fix iSCSI problems.