Table of Contents

Turn on jumbo packets

Important

This is optional. If you are not sure what it does, skip it.

Jumbo packets let a network card send packets of up to 9 KB, instead of the usual 1.5 KB. This can make iSCSI faster.

Every device on the path must support jumbo packets and have them turned on: the server, switches, routers and PCs. Most devices have them turned off at first, so you need to turn them on everywhere yourself.

1. Check which network cards support it

Not every network card supports jumbo packets. If your card is not in the list this shows, it does not support them.

Get-NetAdapterAdvancedProperty -DisplayName "Jumbo Packet"

2. Turn it on

Change Ethernet to the name of your network card:

Set-NetAdapterAdvancedProperty -Name "Ethernet" -DisplayName "Jumbo Packet" -DisplayValue "9014 Bytes"