Table of Contents

Activate your licence

The SharpDay Deploy server needs a licence file called license.lic. You download it from your dashboard on the website, and upload it to the server with the Console. The server then activates it online. This ties the licence to that server's hardware.

Until the server has a valid licence, it does not answer PCs that start from the network.

Get your licence file

  1. Sign in at www.sharp.day and open Dashboard.
  2. Under Your licences, find your SharpDay Deploy licence.
  3. Select Download licence. Your browser saves a file called license.lic.

Keep the file on the computer where you run the Console. The Console sends it to the server for you.

Each licence on the dashboard shows these details:

Detail What it shows
Licence ID The ID of the licence.
Valid from The date the licence starts.
Expires The date the licence ends.
Days remaining The days left before it ends.
Machine ID The server the licence is activated on, or Not activated.

The buttons only show while the licence is Active.

Tip

In the Console's setup wizard, Open your dashboard opens this page for you.

Add the licence to the server

To upload a licence, you must be an Administrator, or have Licence turned on under Access in Admin > Users. See Users and roles.

When the server accepts the file, it tries to activate it straight away.

In the setup wizard

The first time you connect to a new server, the Console opens the setup wizard. See First time setup. Its Licence step asks for your licence file. If the server already has a valid licence, the wizard skips this step.

  1. Select Choose licence file and pick your license.lic file.
  2. Wait for the green The licence is valid. banner. The line under it says if the server could activate the licence:
    • "Licensed and activated." means activation is done.
    • "Waiting to activate this licence online." means the server could not reach the licence server yet. The line also says how many days of offline use are left. See "Working offline" below.
  3. Select Next. You cannot go on until the licence is valid.

If the server does not accept the file, a red banner says why. See "Messages and what to do" below.

Later, the Checks step has a Licence server line. It shows Reachable, or a warning that the server could not reach it.

In the Server License Required window

If the server has no valid licence when you connect, the Console opens the Server License Required window. It opens instead of the main window, and says what is wrong with the licence the server has.

  1. Under Activate this server, select Upload License.
  2. Choose your license.lic file.
  3. Wait. The window shows "License accepted. Verifying...", then it closes and the Console opens.

If the server does not accept the file, the window says why.

If your Console is older than the server, the window also shows Client update available. Select Download Update to update the Console. You can do this without a licence.

To close the window without adding a licence, select Exit.

How activation works

Activation ties the licence to the server's hardware. The server reads 3 details:

  • The ID Windows gives the server (MachineGuid). Windows makes a new one when you reinstall it.
  • The serial number of the hardware. Some virtual servers and motherboards do not report a real one, so the server does not use it.
  • The MAC address of 1 physical network card, wired or Wi-Fi. The server does not use virtual, VPN or Hyper-V adapters.

The activation keeps working while at least 2 of these stay the same. So if the server can read all 3, you can change 1 of them, such as a network card. If it can only read 2, both must stay the same.

An activation does not last for ever. The server renews it by itself, starting 10 days before it runs out. The server checks its licence when it starts, and then every 6 hours.

The server reaches the licence server over HTTPS (TCP 443). You can find the address on Ports and firewall.

Working offline

The server must reach the licence server once to activate. After that, it can go back offline for a time.

Situation How long the server keeps working
The licence has never been activated 30 days from the licence's start date
The licence is activated, but the server cannot renew it 14 days after the activation runs out

The 30 days count from the start date of the licence, not from the day you install it. The start date is Start Date on About > Licensing, and Valid from on your dashboard. If you add a licence more than 30 days after it started, the server must activate it straight away.

When the time is up, the server stops answering PCs. See "When the licence is not valid" below. It tries to reach the licence server every 15 minutes, and starts working again by itself when it can.

Important

Keep the server's date and time correct. The server remembers the latest time it has seen. If the clock goes back, licence checks still use that later time. So if the clock was set too far ahead by mistake, the licence can look expired even after you fix the clock. If this happens, email support@sharp.day.

See your licence in the Console

About > Licensing

The License Status card has a label at the top that shows the state of the licence:

Label What it means
Valid The licence is in date.
Expires Soon The licence ends in 30 days or less.
Expired The licence has ended.
Modified The licence file was changed or is damaged.
Missing The server has no licence file.
Invalid The server cannot use the licence, for example because it is for another product.

Under the label, the card shows:

Field What it shows
Licensed To The company name on the licence. If there is no company name, it shows the email address.
Start Date The date the licence starts.
Expiry Date The date the licence ends.
Remaining The days left, such as "45 days remaining".

Under the card, a banner says if the licence is active, ends soon or has expired. This tab has no buttons.

Note

This tab does not show if the licence is activated. To check, look at Machine ID on your dashboard.

Other places

  • About > About: the SharpDay Deploy Server card shows the same License Status label.
  • Overview: when 30 days or fewer are left, the page shows License expires in and the days left, such as License expires in 12d.
  • The bottom of the side menu shows the licence state and the update state, such as "Licensed, up to date".

When the licence is not valid

The licence is not valid if it is missing, expired, changed, not activated in time, or activated on other hardware.

What stops

  • The server stops answering PCs. Network boot replies (proxy DHCP), Boot file downloads (TFTP), Web downloads (HTTP) and Deployment client all stop. On Boot Files > Services, each one shows Not running and "Waiting for a valid licence".
  • PCs part way through a deployment lose their connection to the server.
  • The server does not check for updates.
  • In the Console, only these still work: About, the Network services list on Boot Files > Services, Admin, and your account menu. The server does not answer the other pages.

The server itself keeps running. As soon as the licence is valid again, it answers PCs again. You do not need to restart it.

Licence states

When the Console connects, the Server License Required window shows one of these. The bottom of the side menu shows a short form of it.

The window says The side menu says What it means What to do
"No license file was found on the server." No licence The server has no licence file. Upload your licence file.
"The server license has expired." Licence expired The end date of the licence has passed. Get a current licence file from your dashboard and upload it.
"The server license file is invalid or has been altered." Licence changed The file was changed, is damaged, or this version cannot read it. Download a fresh copy from your dashboard and upload it.
"The server license is not valid." Licence not valid Any other problem, such as a licence that is not activated. Upload your licence file again. The window then shows the exact reason. See the next table.

Messages and what to do

You see these messages in the setup wizard, or in the Server License Required window after you upload a file.

The message starts with What to do
"That file is not a SharpDay licence." Choose the license.lic file from your dashboard.
"That licence has been changed or is not valid." Download a fresh copy from your dashboard. Do not edit the file.
"That licence is for a different product." or "This licence is for a different product." Use your SharpDay Deploy licence.
"That licence has expired." Use a current licence file.
"This licence does not start until" Wait until that date, or check the server's date and time.
"This licence has never been activated." Let the server reach the licence server. It tries every 15 minutes.
"This server has been unable to reach sharp.day for too long to stay activated." Let the server reach the internet again. It activates again by itself.
"This licence is activated on different hardware." Clear the Machine ID on your dashboard (see the next part), then upload the licence file again.
"The licence server would not activate this licence" Check the licence on your dashboard. The rest of the message gives the licence server's reason.
"Your account can't upload a licence. Ask an administrator." Ask an administrator to upload it, or to give you Licence access.

When your licence ends

From 30 days before the end date, About > Licensing shows Expires Soon, and the Overview page shows how many days are left.

When the licence ends, the server stops answering PCs. The next time the Console connects, it opens the Server License Required window. Get a current licence file from your dashboard and upload it there.

Move to new hardware or a rebuilt server

A licence is activated on the hardware of 1 server. To move it to new hardware, or to a server you have rebuilt:

  1. If the old server still works, make an export on About > Export & Import. See Move, back up and restore.
  2. On your dashboard, find the licence and select Clear Machine ID. Then select Yes, clear.
  3. Install SharpDay Deploy on the new server.
  4. In the setup wizard, add the licence on the Licence step.
  5. If you made an export, choose Import from another server on the New or import step.

An export does not include the licence file, so you always add the licence again.

Clear Machine ID is greyed out until the licence has been activated.

Important

You can clear the Machine ID 3 times in 12 months. After that, email support@sharp.day and we move the licence for you.

Licences and updates

  • The server only checks for updates while its licence is valid.
  • Each version of the server has the date it was built inside it. A licence that ended before that date does not work with that version. The Console then shows the licence as expired.
  • Receive beta updates on About > Updating only shows when your licence has beta access.