First time setup
The first time an administrator signs in to a new server, the Console opens the Set up SharpDay Deploy window. It asks a few questions, saves your answers and restarts the server. After that, the server is ready to use.
Before setup is finished
Until you finish setup, the server only runs 2 things:
- The Console connection, so you can sign in and set it up.
- The licence check.
It does not make or share any folders, and it does not answer PCs. TFTP, HTTP, proxy DHCP and the PE client connection are all off. It still adds its Windows Firewall rules.
If the Console asks the server for anything else, the server answers "Finish setting up this server first."
Make the first admin account
A new server has no users. When you connect to it for the first time, the sign in window shows Create the first admin.
- Enter an Admin user name. It starts as
admin, and you can change it. Do not use\,/or@. - If you want, enter a Display name (optional).
- Enter a Password of at least 10 characters, then type it again in Password again.
- Select Save and sign in.
Important
The first Console that connects to a new server makes its admin account. Make the account as soon as you have installed the server.
The setup window opens next.
The setup window
The steps are listed on the left. A step you have done gets a tick.
At the bottom, select Next to go on, or Back to change an earlier answer. Learn more, at the top, opens the help page for the step you are on.
Only administrators can set up the server. Anyone else sees "This server is not set up yet. Ask an administrator to sign in and set it up." and cannot go past the first step.
| Step | What you do | When it shows |
|---|---|---|
| Welcome | Read what setup will ask | Always |
| Licence | Add your licence file | Only if the server has no valid licence |
| New or import | Start a new server, or import from another one | Always |
| Import file | Choose the export file and what to bring in | Only if you chose to import |
| Checks | Read what the server found | Always |
| Share folder | Choose where files are kept | Always |
| Network | Choose how PCs reach the server | Always |
| Review | Check your answers and finish | Always |
Welcome
This step lists what setup will ask you. Nothing is saved yet. Select Next.
Licence
This step only shows if the server has no valid licence when the window opens. Next stays off until the licence is valid.
- Select Choose licence file and choose the
.licfile you were sent. - If you do not have the file, select Open your dashboard. Your account on sharp.day opens, and you can download the file from there.
The server checks the file and tries to activate it. When it works, a green box says "The licence is valid." If it does not work, a red box says why, for example that the licence has expired.
For more about licences and activation, see Activate your licence.
New or import
Choose how to start:
| Choice | What it does |
|---|---|
| Set up a new server | Start with nothing. You add boot files, images, drivers and workflows afterwards. |
| Import from another server | Bring in an export made on About > Export & Import of another SharpDay Deploy server. This adds the Import file step. |
Set up a new server is chosen at first. Keep it unless you have an export file from another server.
To learn how to make an export, see Move, back up and restore.
Import file
This step only shows if you chose Import from another server.
- Select Choose file and choose the
.zipfile. The Console sends it to the server. To stop, select Cancel. - The server checks the file. It shows the file name, and which server and version made it, and when.
- Under What to bring in, every area in the file is ticked. Untick any area you do not want. Logs shows Export only, as logs cannot be imported.
- If the file's saved passwords were locked with a password, an Export password box shows. Enter the password that was chosen when the export was made. It has at least 8 characters. If you leave it empty, the saved passwords are imported blank.
- Read any warnings in the yellow box.
The import keeps this server's own folders, address and certificate. Nothing is imported until you select Finish setup.
To learn what each area holds, see Move, back up and restore.
Checks
The server checks the things it relies on. Each line has a label:
| Label | What it means |
|---|---|
| Ready | All is well. |
| Note | Something to know. You do not need to do anything. |
| Check | Something is missing or in the way. It may stop a feature you plan to use. |
| Problem | Something stops PCs from being set up. Fix it before you deploy. |
You can select Next even if there is a problem, and fix it later. When you have fixed something, select Check again. Some lines have a Download button that opens the page where you can get what is missing.
| Check | What it looks at | If it is not Ready |
|---|---|---|
| Windows ADK | Whether the Windows ADK is installed. You need it to build boot files and ISOs. | Select Download, install the ADK, then select Check again. |
| Windows PE add-on | Whether the Windows PE add-on is installed, and if its version matches the ADK. | Get it from the same page as the ADK. If only the version is different, builds still run. |
| ADK update | Whether a newer ADK is out. | This is only a suggestion. You can keep the version you have. |
| Windows Deployment Services | Whether WDS is installed or running. It uses the same ports. | Once setup is finished, SharpDay Deploy stops WDS if it runs. Do not run WDS on this server. |
| File sharing | Whether the Windows Server service is running. | Start the Server service in Services. Without it, PCs cannot read images or drivers. |
| Network boot ports | Whether another program uses UDP 69 (TFTP), UDP 4011 (PXE), TCP 15155 (PE clients), or both TCP 80 and 8080 (HTTP). | Stop the other program, or move it to another port. See Ports and firewall. |
| Network address | Whether the server has an address PCs can reach. | Give the server a network address. If it has more than one, you choose one on the Network step. |
| Licence server | Whether the server can reach the licence server. It needs it to activate the licence and get updates. | Let the server reach the internet on TCP 443. See Ports and firewall. |
| Server for NFS | Whether the Server for NFS role is running. | You only need it for Linux installs that read files over NFS. |
For the full list of what the server needs, see Requirements.
Share folder
The share folder holds boot files, images and drivers. It can get very big. For what goes inside it, see The share folder.
- Under Pick a drive, select a drive. Each card shows its free space, its format and if it is the system drive. The folder becomes
SharpDay Deployon that drive, for exampleD:\SharpDay Deploy. - To use another folder, type its path in Share folder on the server, or select Browse to choose a folder on the server. If you choose a whole drive, a
SharpDay Deployfolder on it is used.
The server checks the folder each time you change it, and shows the free space on its drive.
At first, the server suggests a SharpDay Deploy folder on the data drive with the most free space. It only suggests a drive that is not the system drive, is NTFS or ReFS, and has at least 20 GB free. If there is no such drive, it suggests the system drive. If config.xml already names a share folder other than the default one, it suggests that folder.
Folder rules
The folder must be:
- On a local drive of this server. A network path such as
\\server\sharedoes not work. - A full path, such as
D:\SharpDay Deploy. - A folder, not a whole drive.
- On an NTFS or ReFS drive, as the share needs folder permissions.
- Outside the Windows folder.
- Outside the server's own settings folder,
C:\ProgramData\SharpDay\SharpDay Deploy. - New or empty, or a folder that already has SharpDay Deploy files in it.
If a folder breaks a rule, a red box says why and Next stays off.
The server may also show notes. They do not stop you:
- The folder is in Program Files. A folder on a data drive is better for images and drivers.
- The folder is on the system drive, and the server has a data drive.
- The drive has less than 20 GB free.
- Only administrators on this server will be able to open the folder.
The safe choice is a new folder on a data drive, formatted as NTFS or ReFS, with plenty of free space.
Tip
If this server already has a share folder, enter that folder. A folder that already has SharpDay Deploy files is kept and used.
Network
Server address
Choose the address PCs use to reach this server:
| Choice | What it does |
|---|---|
| Pick automatically | The server uses the address Windows uses to reach other networks. If the network changes, it picks again. The card shows the address it uses now. In config.xml, ServerIPAddress is saved as 0.0.0.0. |
| An address | The server always uses this address. Each card shows the address and its network adapter, and says "no gateway" if the adapter has none. The address is saved in ServerIPAddress in config.xml. |
If the server has more than one address, the step asks you to pick the one on the network your PCs boot from.
The safe choice is Pick automatically if the server has one network adapter. If it has more than one, choose the address on the network your PCs start from.
Host name
The Host name is optional. It is the server's full DNS name, such as deploy01.corp.example.com. The box is filled in with the server's own full name if it has one.
Boot media is built to reach the server by this name, and uses the address if the name does not work. If the name is not valid, the step says "That is not a valid host name." and Next stays off.
Review
This step lists your answers: Licence, Start, Import (only if you import), Share folder, Server address and Host name.
To change an answer, select Back. When all is right, select Finish setup.
After you finish setup
The server checks your answers again. It makes the share folder, saves your answers in config.xml and restarts. Keep the setup window open.
When the server is back, the Console connects and signs in again by itself. If it asks you to sign in, sign in.
While it works, the window shows one of these:
| Message | What it means |
|---|---|
| Saving your settings | The server is saving your answers. |
| Importing your data | Only when you import. The server backs up its own data, then unpacks the file. |
| Restarting the server | The server is restarting. This can take a minute or two. |
| Restart the server to finish | The server could not restart itself. Restart the SharpDay Deploy Service service on the server. The window carries on once it is back. |
| Waiting for the server | The server is starting again. |
| The server did not restart | The server did not restart within 2 minutes. Restart the SharpDay Deploy Service service on the server. |
| Could not reach the server | The Console could not connect and sign in again. It tries for up to 5 minutes. Check the SharpDay Deploy Service service is running, then open the Console again. |
| The server is still not set up | The server started again without its new settings. The server log says why. |
If the server turns down one of your answers, you go back to Review with the reason. For example, the server could not make the share folder.
When you import
The server saves your answers first. Then it backs up its own data, unpacks the file and restarts. Setup only counts as finished once the file is unpacked.
If the import stops, for example because the password is wrong or there is not enough disk space, you go back to Import file. The window says "The import did not finish." Fix the problem and select Finish setup again. Or go back to New or import and choose Set up a new server.
Setup is done
The window says "The server is set up and running." If you imported, it also says how the import went.
It then lists what to do next. Select Guide to read the help page, or Open to go to that part of the Console.
| Next step | What it is for | Help |
|---|---|---|
| Build boot files | Make a Windows PE boot image that PCs start from over the network. | Build a Windows PE image |
| Add a Windows image | Import a Windows ISO or WIM file to deploy. | WIM images |
| Add drivers | Turn on driver catalogs or upload your own driver packs. | Drivers |
| Make a workflow | Choose the steps a PC runs, such as format, install and join the domain. | Workflows |
| Point PCs at this server | Set up DHCP so PCs that network boot find this server. | DHCP options |
| Add users | Give your team their own sign in. | Users and roles |
Select Read the quick start guide to open Quick start: set up one PC. Select Open SharpDay Deploy to start using the Console.
Exit before you finish
To leave setup, select Exit or close the window. The Console asks "Exit setup?". Select Exit setup to leave, or Cancel to stay.
Your answers are not saved. The server still does not share folders or answer PCs. The Console goes back to the window where you choose a server. The next time an administrator signs in, setup opens again.
If you exit while the window says it is finishing, the server carries on and restarts. Open the Console again once it has restarted.
How the server knows setup is done
When setup is finished, the server saves this line in C:\ProgramData\SharpDay\SharpDay Deploy\Data\config.xml:
<SetupComplete>true</SetupComplete>
The server reads it each time it starts. If it is false or missing, the server starts in setup again, and the setup window opens the next time an administrator signs in. This can happen after an update from a version that did not have setup.